This tutorial explains the method and procedure for pushover analysis of 2-dimensional RC structural as per EN1998:2004. For this reason, the procedure for modeling and analysis were not explained in detail. For the users who are not familiar with the basic functions for modeling and analysis, it is recommended to review the tutorial for "Eurocode2 Design of a Multi-Story RC Building" before following this tutorial.

• 1. Modeling & Design

    01 Details of Building
    02 Perform Analysis

    03 Check Assigned Rebar Data
   
  
  
  

• 2. Pushover Analysis

    01 Pushover Global Control
    02 Pushover Load Cases

    03 Define Hinge Properties

    04 Assign Hinge Properties

    05 Perform Pushover Analysis

    06 Pushover Curve

    07 Pushover Hinge Status Results

    08 Safety Verification Table

• 3. Applied Design Code

    01 Eurocode

• 4. Materials

    01 Column: C30/37
    02 Beam: C25/30

    03 Wall: C30/37
   
  
  
  

• 5. Applied Loads

    01 Gravity Loads
    02 Static Wind Loads

    03 Static Seismic Loads